Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
We are far advanced, from the time we started producing penis prosthetics. We did a lot of testing and found new materials, which have a very good grip with medical adhesive. Now almost all devices can be very well attached to the body using Silicone Medical Grade Adhesive.
Here are a few things about adhesion tab that we improved: the rough rear side of the prosthetic. We designed the adhesion tab with a rough rear side, to ensure maximum grip with medical adhesive.
Produced from a special mix of silicone, the adhesion tab creates a perfect grip and makes sure the prosthetic stays in place all the time. Wide pubic tab. We designed a bigger attaching area for stronger adhesion to the body.
And if you choose to add some pubic hair to it, you can be sure the adhesion tab is not noticeable at all, and you achieve that ultra-realistic look you always dreamt of.
We created the adhesion tab with high-quality materials, which are used in medicine, so you do not need to worry if it is safe to wear on your body. Very thin adhesion tab. To create maximum comfort and a very realistic look, we designed a super thin and soft adhesion tab. This way, it is easier to attach to the body, it looks more natural and it is not causing any unpleasant sensations. Thin adhesion tab ensures, that the prosthetic stays in place at the same time allowing to forget, that it is there and creating a super-realistic look and feel.
If you are going to use these adhesives, you will also need an adhesive remover: B-508: Secure solvent.
If you are going to use these adhesives, you will also need an adhesive remover:
B-508: Secure solvent
If you are going to use these adhesives, you will also need an adhesive remover: Telesis remover
How to use these adhesives. The information is basic, you will find more accurate details on the bottle or package, provided by the adhesive manufacturer.
This superior, medical grade, low viscosity, water and perspiration resistant formula bonds the prosthetic device to the body. Silicone adhesive has been scientifically tested for dermal irritation and has been proven safe for use on human skin. Direction: Apply to clean, dry surface. Brush onto skin and appliance and let dry. Press firmly together. Removal: Use super solve adhesive remover to lift edges, remove appliance and clean residue from skin. Caution: Do not inhale. Replace cap tightly after use. Store below 77 °F, (25 °C). For external use only. If irritation occurs, discontinue use. Keep unreachable of children. Ingredients: Poly methyl siloxane in a blend of halogenated solvents.
This hydrocarbon based, pleasantly scented adhesive remover provides rapid removal of prosthetics without damage to appliances. Adhesive remover has been tested for dermal irritation and has been proven safe for use on human skin.
Directions: pour a small amount of adhesive remover on a cloth or towel and rub the area clean. When removing prosthetics, use a cotton swab soaked with adhesive remover and work under the edge until removed.
Caution: Combustible. Do not use near heat, sparks, open flame, or while smoking. Keep unreachable of children. Do not ingest. Avoid direct eye contact. Discontinue use if irritation develops.
Ingredients: A mixture of branched chain hydrocarbons.
IMPORTANT INFORMATION: Note: Adhesive is strong, but if you're going to live a very active life, we recommend wearing harness/strap-on to avoid unpleasant situations, such as disbanding, displacement or sliding from the initial position. The reasons may be: your body can excrete more sweat, large friction force. Adhesive is not included in the Emisil kit.
