Recursos e benefícios da guia Emisil

Estamos muito avançados, desde que começamos a produzir próteses penianas. Fizemos muitos testes e encontramos novos materiais, que têm uma aderência muito boa com o adesivo médico. Agora, quase todos os dispositivos podem ser muito bem fixados ao corpo usando o adesivo de silicone de grau médico.

FTM packer adhesion tab

Thin tab

Here are a few things about adhesion tab that we improved: the rough rear side of the prosthetic. We designed the adhesion tab with a rough rear side, to ensure maximum grip with medical adhesive.

Emisil adhesion tab back side

Perfect grip

Produced from a special mix of silicone, the adhesion tab creates a perfect grip and makes sure the prosthetic stays in place all the time. Wide pubic tab. We designed a bigger attaching area for stronger adhesion to the body.

FTM packer thin adhesion tab

Ultra-realistic

And if you choose to add some pubic hair to it, you can be sure the adhesion tab is not noticeable at all, and you achieve that ultra-realistic look you always dreamt of.

Emisil tab Adhesion for prosthetics

Skin-safe materials.

We created the adhesion tab with high-quality materials, which are used in medicine, so you do not need to worry if it is safe to wear on your body. Very thin adhesion tab. To create maximum comfort and a very realistic look, we designed a super thin and soft adhesion tab. This way, it is easier to attach to the body, it looks more natural and it is not causing any unpleasant sensations. Thin adhesion tab ensures, that the prosthetic stays in place at the same time allowing to forget, that it is there and creating a super-realistic look and feel.

Emisil‘s most recommended adhesives list is below:

BT-460 SECURE MEDICAL ADHESIVE

BT-460 Secure medical adhesive

If you are going to use these adhesives, you will also need an adhesive remover: B-508: Secure solvent.

PROS-AIDE ADHESIVE

Pros-aide adhesive

If you are going to use these adhesives, you will also need an adhesive remover:
B-508: Secure solvent

TELESIS 8 silicone adhesive

Telesis 8 silicone adhesive

If you are going to use these adhesives, you will also need an adhesive remover: Telesis remover

Instructions

How to use these adhesives. The information is basic, you will find more accurate details on the bottle or package, provided by the adhesive manufacturer.

Silicone adhesive

This superior, medical grade, low viscosity, water and perspiration resistant formula bonds the prosthetic device to the body. Silicone adhesive has been scientifically tested for dermal irritation and has been proven safe for use on human skin. Direction: Apply to clean, dry surface. Brush onto skin and appliance and let dry. Press firmly together. Removal: Use super solve adhesive remover to lift edges, remove appliance and clean residue from skin. Caution: Do not inhale. Replace cap tightly after use. Store below 77 °F, (25 °C). For external use only. If irritation occurs, discontinue use. Keep unreachable of children. Ingredients: Poly methyl siloxane in a blend of halogenated solvents.

Adhesive remover

This hydrocarbon based, pleasantly scented adhesive remover provides rapid removal of prosthetics without damage to appliances. Adhesive remover has been tested for dermal irritation and has been proven safe for use on human skin.
Directions: pour a small amount of adhesive remover on a cloth or towel and rub the area clean. When removing prosthetics, use a cotton swab soaked with adhesive remover and work under the edge until removed.
Caution: Combustible. Do not use near heat, sparks, open flame, or while smoking. Keep unreachable of children. Do not ingest. Avoid direct eye contact. Discontinue use if irritation develops.
Ingredients: A mixture of branched chain hydrocarbons.

IMPORTANT INFORMATION: Note: Adhesive is strong, but if you're going to live a very active life, we recommend wearing harness/strap-on to avoid unpleasant situations, such as disbanding, displacement or sliding from the initial position. The reasons may be: your body can excrete more sweat, large friction force. Adhesive is not included in the Emisil kit.