Adhesive guide for erect models
|
We do not recommend using adhesives with the Erect models due to their size and weight, as adhesives may cause the prosthetic to disbond or shift from its position, especially during active use. While the adhesive is strong, it may not provide the necessary stability for this model. For a secure fit during an active lifestyle, we suggest using a harness or special underwear to avoid any discomfort or displacement. More information about Underwear. However, if you still choose to use adhesive, here is all the information you need to know. 1. Apply the adhesiveBefore applying the adhesive, please make sure you clean the skin area to which you will attach the packer. You need to remove hair from this part of the body, and the For more information check this Blog post. |
skin needs to be cleaned properly to make sure the packer is attached perfectly. You can use any type of body wash or wet wipes for this purpose. Once you clean the skin, let it dry for a few seconds.
2. packer position Once you applied the adhesive, attach your packer to the body and position it carefully. Please try to make sure that you attach it in the right position and try not to move it around for too long, as the adhesive may start to cure. After you position the packer, then let it dry for a few minutes. |